Home > Hard Drive > Computer Slow After Adding Hard Drive

Computer Slow After Adding Hard Drive


and ur write he DIDNT start off with TAKE drive out of box… jeeees…. Any ideas?It’s a new build with:ASRock X79 Extreme 9 motherboardSamsung 512MB 830 SSDSeagate 4TB Hard DiskThe SSD and the larger disk drive are both on the only 2 Intel SATA3 ports. as i do not want to partition / reformat it. So one IDE cable for one drive and then put the second drive on the other IDE cable with your Optical Drive. 04-27-2007, 07:34 AM #3 EndOn9 Registered Member navigate here

Indexing is not enabled for the drive. I've tried switching windows' Power Management off, flashing the BIOS afresh, updating drivers, switching SATA ports, switching power connectors and... i have windows xp so it is not showing up on my computer. I am unsure if I noticed the slowness before or after I reinstalled Windows.

Computer Slow After Adding Hard Drive

If I unplug it I’m back to 5 or 10 seconds till the login. In total it took about one minute and 50 seconds before it reached the login part and then another minute and a half before the computer is usable. Especially from WinXP 32bit to Vista 64bit. Spyware is another type of virus which is another reason for the slow start up of your system.

can some one please help me. Hope you can help, so far this has been a longwinded exploraton of my computer. Then it jumped to 2-3 minutes. External Hard Drive Taking Forever To Load This issue is really perplexing me.

Boot times now drop to 8 seconds.5. Ssd Slow Boot With Hdd Problem solved. Do you also get 83mb/s in pcpitstop test? http://www.pcreview.co.uk/threads/slow-startup-after-installing-new-sata-hard-drive.3535297/ Now I want to remove this and install Ubuntu.

I had a few downloaded apps and drivers on it and chose not to reformat.Thanks for all ya'll tips! Windows 7 Boot Time Optimization However, when I loaded XP the icons did not appear and I no programs are on the hard drive. Reply Duane Price says: March 21, 2008 at 4:48 pmThanks so much for your help. How do i clone the 40gig drive onto the 250gig without formatting the 250gig.

Ssd Slow Boot With Hdd

Back to top #16 julko julko Member Members 237 posts Gender:Male Posted 25 October 2009 - 07:03 AM Almost not possible but it is:) 400gb seagate works again as it should. I may have reformatted it 1 days ago which could account for the activity time but I wiped the laptop drive around the same time... Computer Slow After Adding Hard Drive There still also another possibilities > about what caused this too but I want to set these aside first. > > Could someone tell me how to solve the slow bootup Second Hard Drive Slowing Down Computer RealBeast said: With both drives attached to Intel controller, SSD to the 6Gbps and HHD to a 3Gbps open the bios and insure that the HHD is not in the boot

It happen while I was surfing Digg, > off it went, and all I had was a black screen and a huge paper weight. check over here Reply Elliot says: August 11, 2007 at 9:03 amThanks! No problem, fast boot. Check the BIOS to make sure that the drives are all being recognized. Ssd Slow Boot Windows 10

Media-Monster - Arlington, Texas==================================================================== EyrimanFeb 15, 2016, 11:55 PM mgoetter said: Old thread but I had the same problem with a data drive (1TB), tried everything in this thread then I It’s only after I make a Window system image to the 3.6TB GPT drive and the lag still happens even after removing everything from that drive. When my daughter's computer died, I put HER HD in an external enclosure and used it as an external HD. http://iversoncreative.com/hard-drive/hard-drive-freezes-computer-when-connected.html but the “Initialize Disk” wizard pop up, wont show up.

Commodore 64 to modern TV What would happen if you made Spellskite Hexproof? Ssd Slow Boot Windows 7 This didn't help.3. IDE hard drives have settings for master, slave and cable select.

I'll try to keep it as simple as I can.

When I try to boot up the new HD using my Windows boot/installation disk, I get a message that Setup could not find any HD installed on my PC. I have hooked everything up correctly as you described but when I boot up my computer it freezes on computer screen,when I disconnect the wires and restart it boots up normally?I What’s even more cool is that after removing the WindowsImageBackup folder off the 4TB drive it still has the longer 2+ minute boot time. ???????? New Hard Drive Slow I updated the question. –mouche Jan 21 '11 at 14:34 add a comment| up vote 1 down vote Try using Western Digital's Data Life Guard Tools to run a diagnostic.

Then it jumped to 2-3 minutes. The second one was for storage. If you are replacing your current drive and cloning it to your new drive, you will need to connect both drives. weblink Eliminating any software in the startup that does not need to start with the boot can really help.

What’s important is that it now works fine! Since I started with a fresh installation, I was able to figure out what caused the problem. I´m reading it right now. any suggetion?

Each manufacturer has different jumper settings, so I can't give you exact instructions here. does exactly the same thing. 04-27-2007, 07:48 AM #4 delboythe2nd Registered Member Join Date: Apr 2007 Location: Melbourne, Australia Posts: 18 OS: Windows XP Pro SP2 My xxx Reply walter says: August 17, 2007 at 12:47 amHello, I've been tring to install a SATA hard drive with no luck. I don't know if the particulars shown here, apply to your drive or not.

I used EaseUS free to clone Windows 7 from another drive (to fix another issue previously documented) but what did it for me was sticking a Windows restore onto one of At this point, you may want to make some quick sketches of just how everything is in there: Which direction is everything facing? Reply Jimmy says: December 1, 2008 at 8:49 pmThanks, I was having an issue initializing my second SATA hard drive.