Home > Windows Xp > Nlite Slipstream Windows 7

Nlite Slipstream Windows 7


Next locate your DISM.exe file. This happens when the installer looks for a parallel ATA (Advanced Technology Attachment) interface but finds a serial ATA interface instead. "As of 2009, SATA has mostly replaced parallel ATA in I've tested this method and it's bulletproof (atleast so far )...First of all I want to thank the guy that posted THIS several years back (and it was for Windows 2000 You can now install Windows XP as you would normally. this contact form

Did this article help you? Save the file and exit. Using the CD on other chipsets may render your PC unbootable but most likely will not allow the installer to see your hard drive.**** Things You'll Need A computer running any Slipstream time!

Nlite Slipstream Windows 7

It's pretty swank, I didn't slim it down as you have, but I did use their files as a base to integrate the Intel SATA drivers onto a vanilla OEM WinXP, Unfortunately just checking bootable in your disk burning software isn’t enough (nero sucks btw). Powered by Mediawiki.

nLite window will look like this... Note that it's important that the .SYS file is uncompressed.4. You might want to check out this forum: http://www.msfn.org/board/index.php?c=9. Windows Xp Slipstream Drivers About this wikiHow How helpful is this?

XPSP3SATA). 18 Now just click on Burn and wait for the CD writing process to complete. 19 Congratulations, you have successfully created a bootable Windows XP installation CD with your SATA Intel Rapid Storage Technology F6 Driver Diskette Or sign in with one of these services Sign in with Facebook Sign in with Twitter Sign Up This Topic All Content This Topic This Forum Advanced Search Facebook Twitter Google I put this on line 18800.4.3 Under the section [sCSI.Load] add:iastor = iastor.sys,4Change the names iastor and iastor.sys to your file's name. Community Q&A Search Add New Question Ask a Question 200 characters left Submit Already answered Not a question Bad question Other If this question (or a similar one) is answered twice

This is what actually mounts the install.wim image and allows you to inject the .wim file with your third-party drivers. Windows Xp Sata Drivers Download XP users can obtain XP SP3 here. You have to extract the boot file from the original disk or mounted image and then reinject it into your new .iso image at burn time. Main Menu You are Here Ozzu Webmaster Forum Microsoft Windows ForumSlipstream SATA drivers into a ...

Intel Rapid Storage Technology F6 Driver Diskette

So in the end it's more work but cleaner in that you can (possibly) skip the OEMFiles. 0 Share this post Link to post Share on other sites Miles4    0 Use a search engine to locate nLite v1.4.9.1 or download the installer from the following location: http://www.nliteos.com/download.html 4 Insert your Windows XP CD and cancel the AutoPlay menu if it comes Nlite Slipstream Windows 7 Click on Drivers and Bootable ISO, then click Next. 12 You have to locate our SATA controller driver here. Windows Xp With Sata Drivers Iso When this is finished, click Next, eject your Windows CD and insert a blank CD-R 17 You should be at the Bootable ISO window.

Skill Pi 1600MHz 7-8-7-24 1.5v Video Card(s): MSI R9 280x GAMING 3GB Hard Disk(s): Mushkin Enhanced Chronos Deluxe 120GB Optical Drive: Plextor 880SA LCD/CRT Model: Asus VK266H 25.5" Widescreen 1920x1200 Case: weblink Install nLite and open it. The install.wim is the files that you are going to modify and inject drivers into using the Windows 7 OPK / DISM.exe utility. It would be nice to just drop your drivers and 1 new text file into the I386 dir.... Nlite Download

This is where the actual driver injection took place, right here in the DISM command utility. Press any key to continue"I am using a combination of Linux Boot CD and a Unattended installation over a network.Thanks-$chug 0 Share this post Link to post Share on other sites I am only telling you what In used. navigate here in my case I had to run an elevated command prompt from the location or folder that the DISM.exe was in.

Nope. Add Sata Driver To Bootable Usb Flash Drive So I googled and googled and did not find any x64 versions of the SATA drivers. The install.wim is the files that you are going to modify and inject drivers into using the Windows 7 OPK / DISM.exe utility.

It wasn't extra-ordinarily helpful, but I came across something similar not long after.

comment out or remove anything under MassStorageDriver and OEMBootfiles you might have in WINNT.SIF.2. RSS ALL ARTICLES FEATURES ONLY TRIVIA Search The How-To Geek Forums Have Migrated to Discourse How-To Geek Forums / Windows XP (Solved) - Slipstream SATA drivers into Windows XP Professional For the disc to recognize the raid array on boot, you'll need to repeat the process with the boot.wim, which is why you copied it over to the directory back in Nlite Windows Xp Select the Service Pack, Drivers, and Bootable ISO tasks, and then click Next.

I put this on line 21586.5. Larger image Click "Next" 4. Enjoy your new Windows Installation CD with built in Driver for SATA AHCI :) larger image click "Finish" Need any help? http://iversoncreative.com/windows-xp/upgrade-windows-xp-to-windows-8-free-download.html It then seals the image back up and let you copy the new install.wim file back to the place you originally took it from on the extracted .iso folder in case

Currently it supports integrating some Sata/Raid drivers. Click on Drivers and Bootable ISO, then click Next. 12 You have to locate our SATA controller driver here. Just click Next. 11 Now you are at the Task Selection window. EDIT Edit this Article Home » Categories » Computers and Electronics » Operating Systems » Windows » XP Instructions ArticleEditDiscuss Edit ArticlewikiHow to Slipstream Your SATA Drivers Into a Windows XP

I used WinMerge to find the differences, and the most changes where in the TXTSETUP.OEM file you are talking about. It will ask if you want to replace the files - double-check that they're bigger and agree to it. 12. In order to run DISM.exe you will need to access it from an elevated command prompt. Select Direct Burn for the Mode type and enter a volume label for your CD (eg.

Thank you in advance! All Activity Home Unattended Windows Discussion & Support Other Unattended Projects Device Drivers Add/slipstream SATA drivers - A fully working solution Privacy Policy Contact Us © 2001 - 2017 MSFN Community I would like to install Windows on it, but Windows only allows introduction of SATA drivers via a floppy drive. Click Next. 7 A message pops up saying "Select where to save the CD installation files for modification", just click OK. 8 Select Desktop, click Make New Folder and name it

As of this writing, I found it at this particular location, but it may not be there later. 4. Keep the other files - you'll need some information from them a little later.4. Once completed, it will display information about the XP installation files. They offered it for free using the following registration information, courtesy of Raymond: Name: PC User readers Serial: 4BF9-8D1E-1786-30A8 Please notice that it only works for a very specific version of

Essentially the version that gives you the individual .inf, .cat, .sys files instead of an installer.